New Materials · New Technologies · New Solutions

Integrated service provider

Empowering packaging marketing with anti-counterfeiting technology

Precautions to be observed when incorporating optical‑variable pigments into the production and processing of products.



Optically variable pigment In addition to being used on printed materials, it is also widely applied in plastic products; the following discusses… Optically variable pigment In the application of plastic products, the following points should be noted during the manufacturing and processing stages:

1 , Used in the extrusion and injection molding processes of plastic products Optically variable pigment At this stage, do not add common pigments or fillers such as titanium dioxide, calcium carbonate, barium sulfate, or carbon black, as they will mask the color‑changing effect.

2 When casting, molding, or curing plastic products, acrylic glass, nylon monomers, and unsaturated polyester should be added first. Optically variable pigment and stir until uniformly dispersed, then add an initiator or a curing agent to initiate crosslinking or polymerization; the reason is that the viscosity of the polymeric matrix rises rapidly at this stage. If photochromic pigments are added at this point, the pigment particles will become heavily encapsulated, leading to uneven dispersion, and the stirring process itself can also trap a significant amount of air bubbles.

3 During the crosslinking and curing of epoxy resins and unsaturated polyester resins, significant internal shrinkage stresses are generated, which can lead to… Optically variable pigment The rupture of the microcapsule shell can allow chemical substances to penetrate into the interior of the photochromic pigment, thereby compromising its color‑changing performance. This phenomenon is particularly common when polyamine‑based curing agents are used and the cured epoxy coating exceeds 0.2 mm in thickness. Therefore, careful consideration should be given to the selection and application of crosslinking agents or curing agents.

4 When producing color masterbatches, avoid subjecting light‑fast pigments to repeated extrusion and pelletizing processes.

5 Using high-shear equipment such as internal mixers, kneaders, high-speed dispersers, and twin-screw extruders to pre‑mix plastic pellets with photochromic pigments can severely damage the protective coating on the pigment surface, thereby causing… Optically variable pigment Due to their color‑changing properties, it is advisable to avoid using these devices for the pre‑mixing of plastic pellets with color‑changing pigments.

6 In the formulation of PVC resin-based plastic products, it is advisable to avoid using phosphorus‑containing stabilizers and plasticizers, as they can cause severe residual discoloration in injection‑molded parts even after decolorization.


Optical variable pigment, optical color-changing pigment, optical color-changing powder