New Materials · New Technologies · New Solutions
Integrated service provider
Empowering packaging marketing with anti-counterfeiting technology
A detailed explanation of the principle behind producing color-changing effects by using optical-variable pigments to formulate optically variable inks.
Release date:
2020-05-05 18:16
Optical color‑changing phenomena are a rather unique occurrence that spans both physics and chemistry, and until the issuance of the new series of Renminbi banknotes, they were little known to the general public. Today, they are gradually becoming more familiar; for example, when we use a 100‑yuan note for shopping, cashiers often hold it up to the light to verify its authenticity. In China, this technology was first applied to the 100‑yuan and 50‑yuan denominations. Optically variable ink Implementing anti-counterfeiting measures also reflects the trend in the industry toward leveraging high-end anti-counterfeiting materials. Optically variable ink Due to its characteristics—easy to identify, difficult to counterfeit, and excellent visual appeal—it has been widely favored by governments worldwide for currency anti-counterfeiting, naturally commanding a significantly higher price than ordinary inks.
Below, we provide a detailed discussion of the anti-counterfeiting color-changing mechanism of optical variable inks:
Optically variable ink Its optical variable effect is generated by the optically variable pigments contained in the ink. Optical variable film fragments are the primary constituent of these pigments and exhibit specific spectral characteristics. Optical variable films are produced using vacuum deposition technology, employing multiple materials with differing refractive indices and leveraging the principle of multilayer thin-film interference. By meticulously tailoring the composition, thickness, and sequence of each layer according to a defined film‑stack structure, the layers are sequentially deposited onto a common substrate. When observed from different angles, they display varying colors—a phenomenon also attributable to angle‑dependent color‑changing pigments. The following diagram illustrates a multilayer optical thin‑film structure (based on thin‑film optics theory), used to analyze changes in reflected light and related physical quantities—specifically, the amplitude vectors of the reflected light at each interface within the film stack: r1, r2, e^−2iδ1. …, r k+1 e −2i(δ1 + δ2 + … + δk), where r1, r2, …, r k+1 are functions of the refractive indices N0 and N1, N1 and N2, …, Nk+1 and Nk on either side of the interface, respectively; these are referred to as reflection coefficients. δ denotes the phase difference between successive reflected waves: δ1 = 2π/λ • N1 d1 cosθ1, …, δk = 2π/λ • Nk dk cosθk, where λ is the wavelength of the incident light, d1 and dk are the thicknesses of the first and kth thin films (with film thicknesses on the nanometer scale), and θ1 and θk are the angles of incidence of the light in the first and kth films, respectively (θ1, θ2, …, θk are determined by θ0 and the refractive indices N0, N1, …, Nk). The reflectance R of a multilayer optical thin film is a function of the reflection coefficients r (i.e., N1, …, Nk) and the phase differences δ (i.e., λ, θ0, and d1, …, dk).
Accordingly, we analyze as follows:
Ⅰ. For a given (design‑optimized) multilayer film structure, the material type N and thickness d of each layer are determined. When both the incident medium N0 and the refractive index of the surface are known constants, the surface reflectance R becomes a function solely of the wavelength λ of the incident light and the angle of incidence θ0.
Given a specific angle θ0, one can obtain the reflection spectrum curve of the multilayer system as a function of wavelength at that particular θ0. In other words, each distinct multilayer structure exhibits a characteristic reflection spectrum, and this spectrum varies with the angle of incidence θ0. It changes in response to alterations. This is why the “interference colors” produced by artificial thin films can shift with variations in the angle of light incidence and the viewing angle (as shown in Figure 2).
II. We can perform coating‑system design as needed, rationally calculate and select appropriate coating materials and layer thicknesses, and adjust N and d. By adjusting the value, the desired reflectance spectrum and optical performance parameters can be achieved, fulfilling the aspiration to control and tailor the surface reflectance spectrum and optical properties of objects.
Optical color‑changing films are produced using a high‑precision vacuum coating process. After undergoing a series of physical and chemical treatments, including grinding, special binders and additives are incorporated to formulate the ink. When this ink is printed onto a substrate, the optical color‑changing pigment particles align parallel to one another and rise to the surface of the ink layer, thereby preserving the film’s color‑changing properties. This is precisely what makes optical color‑changing ink indispensable for anti‑counterfeiting applications.
Based on the spectral principles outlined above, we can conduct the following analysis:
1 , with a relatively constant multilayer structure, the film-layer material refractive index N, thickness d, and the incident medium refractive index N0 Since all these quantities are constants, the surface reflectance R is solely a function of the wavelength λ of the incident light and the angle of incidence θ0.
Given θ0, one can compute the wavelength‑dependent reflectance spectrum of the multilayer system under this fixed θ0. In other words, each fixed multilayer configuration has a characteristic reflectance spectrum, and this spectrum varies with the angle of incidence θ0. changes with variations. This demonstrates that the color shift with viewing angle… Optically variable ink The principle behind the color change lies in the fact that the “interference colors” produced by artificial thin-film systems vary with changes in both the angle of light incidence and the viewing angle.
2 To better control the surface reflectance spectrum and optical performance of an object, we can design the coating stack and adjust the number of layers (N) and layer thicknesses (d) to achieve the desired optical properties and spectral characteristics.
Optical variable films are manufactured using a high-precision vacuum coating process, followed by a full range of physicochemical treatments (such as grinding), and then formulated with special additives and binders to produce Optically variable ink When this type of optically variable ink is printed on paper substrates such as securities and currency, the optical color‑changing micro‑particles rise to the surface of the ink layer and align in parallel, thereby ensuring the color‑changing performance of the optical film. This also provides a clear explanation of… Optically variable ink Color-changing anti-counterfeiting feature, easy to verify and difficult to replicate.
Optical variable security ink, optical variable ink, optically variable color ink